RV's are fast airplanes and one of the things that makes them fast is flush rivets. Rivets hold the sheetmetal to the airframe and flush rivets lay flat with the surface resulting in the least amount of drag (resistance) while the plane flies through the air. In order to accept flush rivets, the skin has to be dimpled. I have a tool which does this using some dimple dies (pieces of metal) which when squeezed together form a dimple on a flat piece of wing skin. Check it out!
Protective plastic removed from leading edge wing skin.
Red dimpling frame tool used for its large "throat" reach.
The business end of the dimple dies. Made right here in Texas down the road in Hicks.
The finished product. This is the inside of the wing skin.
And the outside. A rivet will nest inside the dimpled skin and then be set with a rivet gun and bucking bar.
Pretty sure I have lost most people by now, but Lisa wanted me to post something on the blog. =)
This is still the best thing with dimples though... my lovely wife!

